Industrial Area A1, Block 13002
General Inquiries
Industrial Area A1, Block 13002
General Inquiries
Choosing the right piping system is one of the most critical decisions in any construction or infrastructure project. A wrong selection can lead to system failures, costly repairs, and long-term safety risks. PPR-C (Polypropylene Random Copolymer) pipes have become the material of choice for water systems across Egypt and the Middle East — but selecting the right type and pressure rating requires a clear understanding of your project demands.
In this guide, we walk you through the key factors to consider when specifying PPR-C pipes for your next project.
PPR-C pipes are classified by their pressure rating, known as the Nominal Pressure (PN):
| PN Rating | Max Working Pressure | Typical Application |
|---|---|---|
| PN10 | 10 bar | Cold water supply in low-rise buildings |
| PN16 | 16 bar | Cold water in multi-storey buildings |
| PN20 | 20 bar | Hot and cold water systems |
| PN25 | 25 bar | High-pressure hot water and industrial systems |
Ratings apply to water at 20 °C over 50 years; allowable pressure falls as temperature rises.
Rule of thumb: The higher the building floor count or the hotter the water, the higher the PN rating you need.
Pinoplast PPR-C pipes are available in sizes ranging from 20mm to 110mm. Size selection depends on:
For residential projects, 20mm-40mm pipes handle most indoor supply lines, while 63mm-110mm pipes are used for main distribution risers.
The most cost-effective option for standard cold and hot water supply in residential and commercial buildings. Available in PN10 through PN25, in green, sizes 20mm-110mm.
A three-layer construction (Green/White/Green) that combines the strength of the outer layers with a stabilizing middle layer. Ideal for buildings where thermal expansion needs to be controlled.
The premium choice for high-pressure and high-temperature applications. The glass fiber middle layer dramatically reduces thermal linear expansion, critical in long pipe runs and industrial installations.
If your pipes will be exposed to sunlight (outdoor installations, rooftop systems), choose UV-stabilized pipes with a protective black outer layer to prevent material degradation.
Specially manufactured in dark red for easy identification, these high-durability pipes meet the stringent requirements of firefighting system installations.
| Condition | Recommended Pipe |
|---|---|
| Indoor cold water | Standard PN16 |
| Indoor hot water | Standard or Multilayer PN20 |
| Outdoor / exposed to sun | UV Stabilized |
| Compressed air | Compressed Air System Pipe |
| Industrial hot liquids | Glass Fiber Reinforced |
| Firefighting systems | Firefighting Specialty Pipe |
| High-rise buildings | Glass Fiber PN25 |
The best piping installations use pipes, fittings, and valves from a single manufacturer. Mixing brands can lead to dimensional mismatches, inconsistent material properties, and warranty issues.
Pinoplast offers a complete system – PPR-C pipes, fittings (couplings, tees, elbows, end caps), and valves – all engineered to work together and backed by a 50-year product warranty against manufacturing defects.
Selecting the right PPR-C pipe comes down to four key questions: What is the operating pressure? What temperature will the water reach? What are the environmental conditions? What diameter is required for the flow rate? Answer these correctly, and you will have a system that performs reliably for decades. For project-specific guidance, our technical team is available to assist from specification to installation.